PART |
Description |
Maker |
L982503 L9825TR |
Octal Low-side Driver For Resistive and Inductive Loads With Serial / Parallel Input Control, Output Protection and Diagnostic OCTAL LOW-SIDE DRIVER FOR RESISTIVE AND INDUCTIVE LOADS WITH SERIAL/PARALLEL INPUT CONTROL,OUTPUT PROTECTION AND DIAGNOSTIC Octal Low-side Driver For Resistive and Inductive Loads With Serial / Parallel Input Control, Output Protection and Diagnostic
|
STMicroelectronics ST Microelectronics
|
BTS730 Q67060-S7007-A2 Q67060-S7007A2 |
PWM Power Unit (The device allows continuous power control for lamps/LEDs or inductive loads.) TRANSISTOR SMD PROFET LESITUNGS MOSFET PWM Power Unit (The device allows continuous power control for lamps,LEDs or inductive loads.) From old datasheet system
|
SIEMENS AG SIEMENS[Siemens Semiconductor Group]
|
UDK2547 UDK2547EB UDQ2547B UDQ2547EB UDN2547B UDN2 |
Quad Power Driver provides an Interface between Low-Level Logic Circuitry and Power Loads(为低电平逻辑电路和功率负载间提供接口的四路功率驱动器) PROTECTED QUAD POWER DRIVERS
|
Allegro MicroSystems, Inc. ALLEGRO[Allegro MicroSystems]
|
SAN3020 SA2531 SA2532 |
SINGLE CHIP TELEPHONE POWER EXTRACTION FOR EXTERNAL LOADS
|
SAMES[Sames]
|
A4957 |
The A4957 is a full-bridge controller for use with external N-channel power MOSFETs and is specifically designed for applications with high-power inductive loads such as brush DC motors.
|
Allegro MicroSystems
|
BTS550P |
Smart Highside High Current Power Switch (Overload protection Current limitation Short circuit protection Overtemperature protection) From old datasheet system
|
Siemens Semiconductor Group
|
NE57607GDH NE57607_1 NE57607YDH NE57607 NE57607C N |
Two-cell Lithium-ion battery protection with overcurrent, over- and under-voltage protection 2-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8 Two-cell Lithium-ion battery protection with overcurrent over- and under-voltage protection From old datasheet system
|
NXP Semiconductors N.V. PHILIPS[Philips Semiconductors]
|
U2352 U2352B |
PWM Power Control for DC Loads
|
TEMIC[TEMIC Semiconductors]
|
BTS612N1 BTS612N1-13 |
Fast demagnetization of inductive loads
|
Infineon Technologies A...
|
IL-2022-H IL-2022-L IL-2022-M |
Reed Switch for Inductive Loads
|
Reed Relays and Electronics
|
BTS410F2 |
From old datasheet system Smart Highside Power Switch (Overload protection Current limitation Short circuit protection Thermal shutdown)
|
Siemens Semiconductor G... SIEMENS[Siemens Semiconductor Group] SIEMENS AG
|
RE027 |
RE027 [Updated 2/03. 9 Pages] RE027 is a low drop out (LDO) voltage regulator macrocell with a fixed 2.8V output voltage. rated for loads up to 130 A Low Drop Out (LDO) voltage regulator macrocell with a fixed 2.8V output voltage, rated for loads of up to 130 mA. A typical application is radio section supply in mobile terminals.
|
Atmel
|